Signature table

The following segment describes producing a signature table.

They should be given at that time a list with all line kinds have in which all necessary line kinds are performed. Besides, line kinds can seem just like that several times if these look identical though at the moment, but if necessary show different function. Such a table becomes, e.g., entries for

Management, middle tension

Management, low-voltage

Private connection

Inscription private connection

show.

Alternatively you can fix a system with which the tools are defined for single line kinds so all required combinations of line width and colour. In this case the functional allocation is carried out in the signature table.

As the second you get together all definitions of sign keys. The function and with it the appearance of the sign keys should be mainly regardless of the object keys. This means a better overview, because the users close in the course of the time from the numerical value of the sign key on his function. This supports the issues of the system.

Now for each of these definitions you fix the appearance. In addition you define the in each case following:

•If the line is drawn by symbols

In this case additional information is required:

Symbolic number

Distance of the symbols

Minimum distance from the line end

•Colour or tool number of the line

The colour can be fixed about a tool number. Then the real colour arises from the loaded tool table. Then in the signature table stands TLN 23. They can give the colour also firmly, then the sequence will stand in the table for a red line RGB 255 0 0. If the definition about the tool table arises occurred the advantage to hold this table for the screen and the expression different, e.g., to suppress the line width on the screen, because this often interferes there. On the other hand, the other step is often difficult in the colour definition to overlook.

•Kind of the Strichliierung

The signature table permits any line kinds. They give in the signature table only the sequence of line and gaps width. A line with 5 mm of line and two points in the distance of 2 mm proves the entry BLN 500 200 200 200 200 200. The number of the information must be always just.

•Width of the line

If the colour is accommodated in a RGB sentence directly in the signature table the line width is given as an other number behind the RGB colour. The value is to be listed in 1/100 mm in the plot. If your plan has the graduation 500 and has the line a width 30, the line is drawn with the expression in the graduation 500 0.3 mm wide. On the screen this line is 15 cm wide (Covered on the graphic data).

If you as a colour a tool number has given the line width in the tool table opposed.

Example

In the following a small signature table is developed. One goes out from a tool table which owns entries for three colours, among other things for lines with a width of 0.3 mm:

1 0 10 11; know / black

1 30 12; know / black 0.3 mm

2 0 20 21; blue

2 30 22; blue 0.3 mm

3 0 30 31; green

4 30 32; green 0.3 mm

Two object types should be used:

Key in 1000, DKY 10 management

DKY 11 inscription text

Key in 2000, DKY 12 field part border

DKY 13 field part number

It turns out the following table:

! Management white, pulled through 0.3 mm

DKY 10

TLN 12

! Management inscription, white, pulled through, thinly

DKY 11

TLN 10

! Field part, blue, Sketched, 0.3 mm

DKY 12

BLN 500 200

TLN 22

! Field part number, blue, thinly

DKY 13

TLN 20